Handling Equipment

TSD M2 Spray Booth

Turntable and Headstock

- Booth Dimensions:  58”W x 48”D x 72”H

- Removable grating inside booth

- Includes lights, 14” exhaust outlet

- Headstock:  12” diameter slotted faceplate, 600 rpm,

  and ¾ HP, 3 PH, 230V Motor

- Turntable:  300 lb. capacity, 350 rpm, 18”diameter slotted

   faceplate and 1HP, 3PH, 230V Motor

- AC Inverter Control

TSD M4 Turntable

Manually Tilting

Dimensions:  41”W x 41”D x 38”H

500 lb. capacity  

 36” diameter slotted steel faceplate

 90 degree tilt by hand crank

 Variable speed up to 360 RPM Max

Gantry Robot Room

Acoustical Room - 8 ft. x 8 ft. x 10ft. high  

 5-axes Gantry Robot  

 2-axes Turntable  

Flat Wall Exhaust Plenum

A-axis stroke:  48 inches, horizontal top speed 150 feet per minute  

B-axis stroke:  36 inches, horizontal top speed 150 feet per minute  

C-axis stroke:  24 inches, vertical top speed 150 feet per minute

D-axis:  rotation 180 degrees, top speed 16 RPM

 E-axis:  rotation 360 degrees, top speed 16 RPM  

Spray Torch load capacity:  30 pounds

 Jog & teach programming, on-screen editing, and security code

Horizontal/Vertical Traverse

Horizontal Stroke:  60” with 3” acceleration & deceleration  

Vertical Stroke:  60” with 2” acceleration & deceleration

Horizontal & Vertical speed:  1-150 SFPM (opt. 200 SFPM)

Stepping capabilities of 1/8”, 1/4”, 1/2” on both axes

Programs:  step horizontal, step vertical, step both or step none

Jog:  up, down, right, left, with speed adjustments

Limit switches on slide adjustment

Air powered counter-balance for torch weight    

Wet Collector Exhaust System

2,500 – 3,000 CFM  

7.5 H.P., 1,800 R.P.M. Motor

Dimensions:  45” W x 40” D x 92” H

Inlet adapter for 12” duct.

Viewing windows

Plumbing for draining and filling      

Flat Wall Plenum

Plenum Dimensions:  7’W x 5’H x 2’D

Suitable for 8,000 CFM  

24” diameter outlet on plenum back

Moveable louvers on front grate