Powder Feeder

AT 1200 Powder Feeder

A powder feeder is used to control the amont of material that is going to the thermal spray process. The powder can be an metal, alloy, ceramic, or a self fluxing alloy powder, carbide.

The AT 1200 is used with Plasma, HVOF, and Combustion Powder operations. The control panel has a digital display of the powder wheel rpm. A flow meter and pressure gage control the carrier gas.

AT 1200 Powder Feeder

– – -AT 1200 Powder Feeder – – – Made in the USA

 

The AT 1200 is a rotating disc powder feeder has it’s heritage in the Miller powder feeder. It is a direct replace meant for the Miller and the Praxair 1264. Features:

  • Made in the USA
  • Standard unit for plasma and combustion powder
  • 150 PSI (1034 kPa/10.3 bar) maximum pressure
  • Heater Blanket On/Off
  • Remote/Local Feed On
  • Remote/Local Wheel Speed
  • Accepts a 0-10VDC or 4-20mA external signal.
  • 0 to 15 RPM Standard
  • 0 to 32 RPM Optional
  • Optional high pressure interface for use with HVOF

 

PF 2810

PF 2810 Powder Feeder

PF 2810

The PF 2810 Powder Feeder is designed to work with Plasma Guns, HVOF Guns, and Combustion Powder(6p II). The control panel has a digital display of the powder wheel rpm. They have a pressure gauge and flow meter to control the carrier gas.

Powder Canister Capacity 215 cubic inches 45 cubic inches
Powder Wheel RPM 5 to 15 (step less) 5 to 15 (step less)
Electric Supply 110 vac 110 vac
Powder Hose Length 10 feet 10 feet
Net Weight 95 pounds 74 pounds