Handling Equipment
TSD RM2 Spray Booth
Turntable and Headstock
- Booth
Dimensions: 58”W x 48”D x 72”H
Hood opening 32" x 50"
- Removable grating inside booth
- Includes lights, 14” exhaust outlet
- Headstock: 12” diameter slotted
faceplate, 600 rpm,
and ¾
HP, 3 PH, 230V Motor
- Turntable: 300 lb. capacity, 350 rpm,
18”diameter slotted
faceplate and 1HP,
3PH, 230V Motor
- AC Inverter Control
TSD M4 Turntable
Manually Tilting
Dimensions: 41”W x 41”D x 38”H
500 lb. capacity
36”
diameter slotted steel faceplate
90
degree tilt by hand crank
Variable speed up to 360 RPM Max
Gantry Robot Room
Acoustical Room - 8 ft. x 8 ft. x 10ft. high
5-axes Gantry Robot
2-axes Turntable
Flat Wall Exhaust Plenum
A-axis stroke: 48 inches, horizontal top speed 150 feet per minute
B-axis stroke: 36 inches, horizontal top speed 150 feet per minute
C-axis stroke: 24 inches, vertical top speed 150 feet per minute
D-axis: rotation 180 degrees, top speed 16 RPM
E-axis: rotation 360 degrees, top speed 16 RPM
Spray Torch load capacity: 30 pounds
Jog & teach programming, on-screen editing, and
security code
Horizontal/Vertical Traverse
Horizontal Stroke: 60” with 3” acceleration & deceleration
Vertical Stroke: 60” with 2” acceleration & deceleration
Horizontal & Vertical speed: 1-150 SFPM (opt. 200 SFPM)
Stepping capabilities of 1/8”, 1/4”, 1/2” on both axes
Programs: step horizontal, step vertical, step both or step none
Jog: up, down, right, left, with speed adjustments
Limit switches on slide adjustment
Air powered counter-balance for torch weight
Wet Collector Exhaust System
2,500 – 3,000 CFM
7.5 H.P., 1,800 R.P.M. Motor
Dimensions: 45” W x 40” D x 92” H
Inlet adapter for 12” duct.
Viewing windows
Plumbing for draining and filling
Flat Wall Plenum
Plenum Dimensions: 7’W x 5’H x 2’D
Suitable for 8,000 CFM
24” diameter outlet on plenum back
Moveable louvers on front grate
RM ClamShell Hood
Exhaust hood to fit on lathe bed
Shutters
adjust from 12
inch to 30 inch
Top flips open
to load and unload parts
| 
